Provides edge blending for multiple projector displays and warping for projection onto spherical screens. HD Wireless Transmitter. Replacement Filter replaced by Extends the life of the projector when operating in smoke filled environments. Remote Control Remote Control was The projector contains a new liquid crystal panel with a high contrast optical system that achieves a contrast ratio as large as , exhibiting natural and smooth gradation.
A wide range of other image adjustment options, including keystone correction, vertical and horizontal lens shift lens sold separately and picture zoom are included.
Sanyo is now part of the Panasonic Group and officially discontinued its production and sales of projectors in LNS-W51 Sanyo. LNS-W53 Sanyo. LNS-W41 Sanyo. LNS-W40 Sanyo. LNS-S03 Sanyo. Call or Email for Price. LNS-W10 Sanyo. Open Box: Call or Email for Price. LNS-W34 Sanyo.
LNS-T32 Sanyo. LNS-W05 Sanyo. LNS-S01 Sanyo. Projector Models. LNS-W50 Sanyo. LNS-S50 Sanyo. LNS-S51 Sanyo. LNS-T50 Sanyo. LNS-T51 Sanyo. Short Zoom Lens Motorized 1. Standard Zoom Lens Motorized 1. Long Zoom Lens Motorized 3. Ultra Long Zoom Lens Motorized 5. Otherwise optical parts follow together and become cause to damage.
Page 47 Optical Unit Disassemblies Mirror units removal and disassemblies. Remove 4 screws-A and remove the Mirror units. Remove 4 screws-B and remove the Stoppers C. Remove screw-C and remove the Stopper E. Remove screw-D and remove the Stopper D. Remove 2 screws-E and remove the Stoppers B. Remove 2 screws-A and remove the Optical filter unit1. Remove screw-E, remove the plate and remove the Optical filter upward. Remove 2 screws-B and remove the Optical filter unit2.
Marker comes this top side. Check the Vcc voltages. Page 57 Troubleshooting Check the terminal board-AV. Check that IIC cator green light? Bus signals When the lamp cover is removed are correct. Two protection systems are pro- vided. Zoom, Focus and lens shift. Therefore IC, K8N, etc. Each adjustment requires ball allen wrenches and slot screwdrivers.
Set the motorized lens shift to the center position horizontal and vertical with Lens Shift Button. Lens shift arrow on screen turns red at center of lens shift. Turn on a projector. Set the projector to "service mode" and project a green grid pattern on a screen. Adjust green grid pattern to sharp focus by pressing Focus buttons on the projector or remote control unit.
Page 70 Optical adjustment 2 Integrator-lens-in adjustment-1 Before Adjustment : 1. Remove the flexible cables of LCD panels from the Main board. Shift the adjustment position of Integrator- lens-out temporarily until shade appears the right or the left on the screen.
And turn on the projector. If the shade appears on the left or right of the screen, adjust in the following procedure.
If the shade appears on the screen, adjust in the following procedure. Adjustment : 1. Refer to Screw Setting. Screws X, Y and Z Fig. Page 76 Optical adjustment 8 Prism P. Loosen 2 screws-B. Turn the projector Power ON. Enter Service adjustment menu. Do not attempt to adjust the following adjustments except requiring the readjustments in servicing otherwise it may cause loss of performance and product safety.
Adjust the voltage by using on the power board Picture mode Normal as following. Enter the service mode. Input signal step gray scale computer signal 2. Change data values of each test points to adjust the fan driving voltage. Page 85 Electrical Adjustments Group-no. Page Mechanical and Optical Parts projection lens is optional.
Page Mechanical and Optical Parts Fig.
0コメント